Perpetual Calendar - UPDATE

HAPPY NEW YEAR! everyone.  It has been 7 long months since I posted on my blog.  I always sound like I am at a 12 step program when I post to my blog.  Perhaps I will do a separate post to catch you up on all my goings on but for this post I want to share a perpetual calendar I have designed and will be creating on my Ustream show on Monday, Jan. 5th @ 4pm EST.  5pm here in New Brunswick, Canada.  Once the Ustream show is over I will also upload the recording to my YouTube channel.  

Here are a couple photos of my completed project.

 ©2015 The Musicalscrapper

©2015 The Musicalscrapper

The photo corners will hold an inspiring quote or word on a 10" x 11/2" piece of paper.  But since the photo corners are 11/2" each the quote or word should be printed only in the centre 7".  

Here is a link where you can download the tutorial.  I updated this after creating the calendar on my stream to make the base in a more practical way.  There is also a a Silhouette cameo studio 3 file and/or an SVG file you can use to cut the days, months, and dates if you wish to use it or you may wish to create your own using a different font.  Perpetual Calendar

Feel free to share the link to this blog post with a friend you think may also be interested in creating this project.  

Thanks and I hope you enjoy the project!

Jean - MusicScrp

The Musicalscrapper

More Stencils

I have been very busy lately designing some stencils now that I have grown to love my gelli plate and even am beginning to get comfortable working in my art journal.

I designed quite a few stencils to cut with my Cricut expression in January.  Because I had purchased SCAL2 (Sure Cuts Alot) before Ptovocraft Sued the company I was still able to use it with my machine and rather than annoying all my followers tweeting each photo one at a time, I figured it would be easier to just write a quick post.  Well turned out to be not so quick but.... are you surprised?

The plastic I have used for all these stencils below was purchased at DOLLARAMA here in Canada and are file folders which I cut in half.

See the great price?  $2.50 for 12 folders.  A bargain for sure.  And I get 24 stencils for that price.  Just over 10¢ a stencil. 

Here are the stencils I designed from scratch using INKSCAPE then cut on my Cricut.

 3-D squares

 Circle Scope

 Hexagon Lattice

 Lattice

 Lattice Circles

 Chevron (herringbone)

 Fancy Pillowtop

large

Fancy Pillowtop

Small

There will be more stencil photos further down the blog keep reading...........

BROTHER SCAN N CUT THE CATASTROPHE

DISCLAIMER - I HAVE TOLD THIS STORY A NUMBER OF TIMES SO IF YOU HAVE HEARD IT VIA TWITTER AND/OR MY USTREAM PLEASE FEEL FREE TO JUMP DOWN TO THE PHOTOS AT THE END.  

 After much research I decided, with my tax refund, to purchase a Brother Scan N Cut.  I bought it through someone in the US (my first BIG mistake).  You will see as I tell my story, Brother is not truly an international company.  IF you buy one of their products, I NEVER will, only buy within the country where you reside.

My Scan N Cut arrived on a Friday I was so excited.  I took it out of the box and read the manual cover to cover.  I had also watched hours and hours of YouTube tutorials.  I set up the machine (I had named her CUTRINA as suggested by Susan LoveRibbons)  as per the instructions and made my first test cut.  YAY.  Trying to make the second cut the mat fed in crooked - the right roller didn't grab the mat so only the left corner went in.  (Now I have experienced this a number of times with my Cricut and had no problems afterwards).  As per the manual, I hit unload and instead of ejecting the mat it grabbed the left corner and pulled it in even further.  SO I checked the manual and followed the directions and manually removed the mat, put power back on and the blade reset.

Now here comes the problem.  I tried and tried to make cuts but the alignment of the blade cartridge was obviously off because it was cutting everything about 2" too far to the left.  I found the calibration instructions in the manual and went through the procedures no less than 5 times (and probably more) but to no avail.  So I called Brother.  But of course it was now late Friday night and no lines were open....   I did get someone on live chat in Brother Canada but they were no help because their binder only told them to tell me to do the steps I had already done.  So I had to wait until Monday.

Along came Monday and I called the toll-free number which directed me to BROTHER CANADA... I was on hold - with HORRIBLE background music no less - for about 20 minutes then got a service agent who had never heard of the Scan N Cut - even though I had chosen that option in the horrible telephone index thingy.  TRANSFER and more elevator music - SIGH.  10 minutes later got someone who at least found the machine in the binder... LOL.  But I was informed that the model I had was an American model so they couldn't help me.  TRANSFER (To Brother USA) and still more elevator Music.  Well first lady I talked to said she was not that department and would.... you guessed it TRANSFER and after an hour of HORRIBLE 30 second loops of the same HORRIBLE elevator music I was about to go BONKERS.  FINALLY I got someone I could tell knew at least what machine I was talking about  But when I explained the situation and she tried to give me the same advice and steps I had already taken I quite frankly told her I was not an idiot had read the manual - and had a Cricut for years and the issue I needed help with was not in the manual nor on their website FAQ.

SO she said PLEASE HOLD I will go talk to my supervisor.  Yup same looped elevator music - another 10 minutes worth.  And when she came back she said, "The machine is broken."  WELL DUH!!!!  3 hours to be told it was broken!!!  Boy they sure are efficient!  So I asked about warranty and how to send it back.  Yup  PLEASE HOLD I need to ask my supervisor - and I almost throw the phone across the room.

Upon her return 10 minutes later she said "We don't have replacement warranty you have to get it fixed".  I asked if I send it COD because I explained I was legally blind.  She said no shipping isn't covered in warranty you have to take it in - "I WILL GET YOU THE ADDRESS OF THE CLOSEST REPAIR RETAILER IN THE US"  I said the US? But I live in Canada and once again reminded her I am legally blind don't drive and a 5 1/2 hour drive from the nearest US city (Bangor, Maine).  She explained that the model I had was a US model and in Canada they sell completely different models.    And once the machine crosses the border the warranty is void.  Um OK ....

After 3 1/2 hours on the phone, she said my only way would be to mail it at my own expense to the US for repair, pay for postage back as well.  Well I could not afford that especially since I figured I had a lemon with it breaking so easily.  The place where I bought the machine graciously returned my money, which they didn't have to do so I appreciate it a great deal.  And they are going to fight with Brother to get the money refunded.  I sure hope they are successful. 

After my catastrophe with my brother Scan N Cut - I decided to be satisfied with my Expression.  It has been a trooper for 4 years and made many, many cuts for me.  But then I started thinking and looking at the extra features of the Silhouette Cameo compared to my Cricut even with the SCAL.  There is a print and cut feature with the cameo.  There are extra steps involved than with the Scan N Cut but is a feature.  They also have some other cutting features and crafters who own one say it can cut more detailed images than the Cricut and it would be faster than my almost 5 year old Cricut. 

So I purchased a Silhouette Cameo which arrived last Tuesday.  It took a couple days to figure out the nuances of the cameo and how the Designer software is different from SCAL.  So far the main difference I had to sort out was the trace feature.  With SCAL it cuts directly from the SVG file so the only tracing is in INKSCAPE if you use a JPEG or PNG file.  SO I had to figure out which trace setting was needed to trace the SVG files I had created in INKSCAPE already.  Sorted that out after a couple trial cuts.

I figured out another important thing, the fact that there is a SMALLER guide line to the left of all the other ridges of the feeder that I have to use to line up the left edge of my mat in order to feed it properly.  I had been trying to line it up with the wrong line because I did not see this smaller line.  Yup I wasted a number of sheets of stencil plastic before I saw this line.  It is now marked with a black sharpie so my 10% vision can see it easily.  PHEW 

So the last 2 days I have been a cutting maniac... It takes quite awhile to get this many stencils.  The cutting is the fastest part.  What takes time is scraping the bits of plastic off the mat, and poking out the bits that stay in the stencil instead of staying on the mat.  But the effort is worth it in the end.  AND this was all done while watching YouTube, Ustream or TV. 

THESE STENCILS ARE ONES I DESIGNED FROM SCRATCH USING INKSCAPE THEN THE SVG FILE WAS IMPORTED INTO THE DESIGNER SOFTWARE.   

Spiral Cutouts

 Extended Triangles

 Sunburst

 this is the small size 6 x 7 there is also an 8 x 10

 Cityscape

 3-D tunnel

 Fan blades

3-D Circle Tunnels

3-D Squares 2

THE NEXT GROUP OF STENCILS ARE ONES I DESIGNED FROM A JPEG FILE ALTERED AND TRACED USING INKSCAPE THEN THE SVG FILE WAS IMPORTED INTO THE DESIGNER SOFTWARE. 

 STEAMPUNK SILHOUETTES

( The butterfly silhouette mask has disappeared into the abyss known as my craft room floor - LOL)

 HANDS UP

This is the large size I also cut 2 smaller sizes

 COBBLESTONE SIDEWALK

STREET MAP

No idea which city or town

THIS LAST GROUP OF STENCILS WERE CUT FROM FILES PURCHASED FROM THE SILHOUETTE ONLINE STORE. 

 WARP SCREEN OVERLAY

Design ID #39283

 WARP SCREEN OVERLAY

Design ID #39282

 WARP SCREEN OVERLAY

Design ID #39091

 CROSSED CIRCLES

Design ID #47014 

SWIRLY BACKGROUND

Design ID #58297

I still have more stencils to cut but i am taking a break for now to move on to some other projects like using them with my GELLI PLATE.  I will do a blog post showing pages created with these stencils once I have some PLAY TIME.

I also have to finish the baby album for my niece.  Baby Girl Borkert is arriving early July.   

See you soon - I HOPE

Jean MusicScrp

AKA The Musical Scrapper

R.C.M.P Tribute

The R.C.M.P is our national (federal) police force.  Usually they police the Rural areas of our country and work in tandem with local forces on federal crimes.The city Council in Moncton decided 10 years ago, or so,  that it was more cost effective to hire the RCMP to police our city instead of having our own separate city force.  R.C.M.P stands for the Royal Canadian Mounted Police aka the Mounties. The Mountie motto is "We always get our man."

Many of you know the past week here in Moncton, NB has been a week of sorrow, fear and violence all due to a 24 year old.  I refuse to name him because i don't want him getting any more print time for his crime.  He strolled down the street of a well populated neighbourhood carrying a semi-automatic high powered rifle, a pump action shotgun, a cross-bow and a knife all in plain view.  He was also dressed in full army fatigues.  He walked right past many civilians even stopping to stare several in the eyes, but did not fire as this was not his plan.  He wanted the police to come and they did.  Within the next hour 5 officers were shot; three were killed and 2 injured.  Like the coward he is he retreated into the woods that surround this neighbourhood. 

Within a couple hours officers from the rest of the province had come to our assistance and they cordoned off  and locked down a large part of our city to keep him contained.  By morning there were more than 300 officers in our city.  There were armoured vehicles and Police dogs and heat seeking equipment in a small plane as well as a drone.  After 28+ hours, during heavy rain, this man (and I use that word loosely) was spotted in a backyard and police surrounded him and he gave up saying "I am done".  He was arrested and later that day charged with 3 counts of 1st degree murder and 2 counts of attempted murder.  He was remanded into custody.

On my Ustream show on Monday,  I created a piece of art so I could share my feelings about these events.  When will these violence seekers realize that they will never really win.  They will not!  Although there has been much fear and pain we will come through it stronger as a community and watch out for our fellow citizens friend or stranger!

My art is created on canvas paper and I used acrylic paint applied with sponge using stencils.  The border at the bottom was cut with my silhouette cameo and collaged with Golden Matte Medium.  I wanted to show respect for the dead and injured officers, all those who came to assist in the capture of the MURDERER as well as display our City's resolve to get through this and move on!

YOU can watch me create this by clicking HERE for my Ustream channel or HERE for my YouTube channel.

Today there was a regimental funeral for the three fallen officers.  It was a wonderful tribute to these 3 brave officers, husbands, fathers, brothers, who gave their lives in the line of duty protecting our wonderful city.   The most poignant photos from today were these ones below showing some of the almost 7000 RCMP officers and other law enforcement officers marching to the Coliseum where the memorial was held.

 THE CANADIAN PRESS/Marc Grandmaison

 THE CANADIAN PRESS/ Marc Grandmaison

There were just under 7000 total law enforcement officers who came from all over Canada, and some from US to attend this service.   Our city is small and there were not enough hotel rooms available for everyone who wanted to come so a call was put out to our city asking for homes to billet these visitors.  Within a few hours they had enough beds for all those attending.  Just another example of the wonderful people living here. 


So now I leave you with these photos ....  R. I. P. 

Const. Dave Ross 32

Const. Fabrice Georges Gevaudan 45

Const. Douglas James Larche 40

2013 Streamathon Project update

Well our 2nd annual New Years Eve Streamathon was a huge success.  Even Ustream played nice and considering the traffic on this busy streaming night, it gave us only a few problems.

When I printed off my project pattern, I noticed a couple of errors so I fixed them and updated my blog post (Dec 7) with the edited pattern.

I am also about to re-record a video of the project because in the confusion of trying to find something on my desk, I did not click record until well into the stream.  I would not have finished the project in the hour so would have had to do a finish up video anyway.  I will do a quick post when it is available.

Thanks to Ozegran - Jen for being head coordinator extraordinaire for this fabulous evening.  A huge thanks also goes out to all the other people who had a hand in planning and organizing this event.  It took many many hands to make this a success.

Most of alI, I would like to thank all those who attended streams whether it was just one, or all of them.  Without an audience this evening would have been rather pointless.  And we met so many new and "old" friends throughout the evening.  I hope that you all come back and visit the streamers at our regular streams and maybe even become a streamer yourself!  This is a wonderful community if crafters who share their wealth of knowledge and have become great friends.  Friends I would never have met without this thing called the internet that too often gets a bad reputation!

Happy 2014 to each and everyone of you!

Thanks
Jean
MusicScrap

2nd Annual New Year's Eve Streamathon

Hey there everyone.  I am so excited that our 2nd Annual New Year's Eve Streamathon is approaching.  Where has the time gone?  Once again we will be celebrating 2014 in most of the time zones beginning in the land down under...  

Jen (Ozegran) has set up a Facebook page and if you have not done so yet go over and sign up.  We will be posting updates and links to streamers blogs so you can get supply lists for all the projects.  We hope you play along or at least join us to chat.  

Did someone say prizes?  Many of the streamers will be drawing for prizes during their stream.  But we also have a number of very generous major prizes donated by craft retailers and individuals.  This year, in order to qualify for the major prizes, you must register here.  Please read the guidelines carefully before registering.  

And who, besides me, is streaming you ask?  Well we have a lineup of amazing artists and crafters presenting a variety of projects from fibre arts to paper arts and who knows what else!  Keep your eye out on the Facebook page as there will be links posted between now and New Year's eve so you can get a glimpse at the projects ahead of time.  Jen has created a PDF showing the time blocks with conversion tables to show who is streaming and when.  

Check it out!  

Next I am going to share with you my project.  I will be welcoming 2014 as it arrives here in Riverview, New Brunswick, Canada.  My stream will be from 11:30pm -12:30am Atlantic time zone (10:30 - 11:30 EST or GMT - 4 hours).  I know, I know, many people don't even realize that Canada has 2 extra time zones than the US, mine and Newfoundland, which is actually a half hour ahead of me! So as my stream begins, it will just be turning New Years in St. John's and the rest of "The Rock", as NFLD is lovingly called. 

This year I am doing a variation on my project from last year.  I have designed a Desk Calendar/Organizer.  Fancy name huh?  I am going to post links below to the pattern which includes a supply list and a PDF for the 2014 calendar we will be adding to the organizer.  

Here is a photo of my completed sample....  This is just the prototype....  

If you wish to play along, download the pattern and have your chipboard and card stock pieces cut and labeled and the calendar printed on cover stock or card stock and trimmed.  Or you can just chat and watch and create it later - or not!  It is totally up to you!

Pattern

Printable Calendar

Hope to see you all as we ring in 2014!

Jean

MusicScrp

Gelli Prints

It has been awhile since I posted so I thought I would share some of the fun I have been having with my gelli plate recently.

These first 2 samples were done using the transfer technique. (I saw this on the Gelli Arts YT channel here)  However, I changed the medium to which I transferred the print.  I also did not use the first step and did not mask off areas on the first layer.

• I layered the paint on the gelli plate being sure to let each layer dry COMPLETELY before adding another layer.
• Once all layers are on and last one dried. I put an 8 1/2 x 11 self-laminating sheet on the plate sticky side down to the paint.  
• Then I used my bone folder to make sure the laminating sheet was securely adhered to the paint below.
• I slowly pulled up the sheet and voila my completed print.

With this next example I followed the steps above but I was not patient enough for the last layer to dry so some of the paint stayed on the gelli plate and I was left with some "blank" or clear spots on the transfer.  These were still sticky however so I added some copper Perfect Pearls powder as shown in the original Gelli Arts video. Problem solved.

These samples above will either be used as backgrounds or cut as layers for cards or atc's or scrapbook pages or Project life layouts.  There are as many uses as your imagination can conjure.

The next 2 photos are of the front and back cover of a journal I made.  they were printed on simple cotton muslin then adhered to chipboard.

The next 2 photos are the front and back of a journal I have made for NanoJourmo As I am going to try some art journaling.  I have done a few pages in my mixed media journal but not with great success - in my eyes anyway.  And that was before my discovery of the gelli plate.  What I have found the greatest thing about the gelli plate is that it has taken away my fear of making layers.  I am not sure why I just couldn't do it straight to the page but once I saw the gelli plate being used I was drawn to it - and to layers.

For this final example I was inspired but this Andy Skinner YT video and I created this art for a family friend who was brutally attacked thanksgiving weekend in New Glasgow, Nova Scotia.

Scott Jones is 27.  He is a pianist, organist and choir director, and a wonderful person who was out celebrating with friends the opening of a friend's art gallery.  The friend he was with was distracted and he was stabbed twice in the back and the attacker attempted to slit his throat.  On a positive note Scott survived this vicious attack.  On a more difficult note he is paralyzed from the waist down as his spinal cord was severed.  Sadly since there was no attempt to rob Scott of anything except his life, it is believed he was attacked because he is openly gay.

This art will be framed and sent to Scott.

This print is done on Polaroid canvas paper.  I thought the quote from Zadie Smith appropriate.  Scott is recovering in hospital still and in a couple weeks hopes to be transferred to a rehab facility where he will learn to use a wheelchair and build his upper body strength.

Scott has the use of his arms and his voice so we are lucky he will still be able to share his music and love of life with everyone he meets.

If you wish to hear Scott Jones play here is a recording from a number of years ago when he was just finished high school.

Thanks for coming.
MusicScrp
Jean

School Bus And Mini Part 1

Part 1 will give you the PDF file with the pattern to create a 3D School Bus that will house a mini.  The Mini album will be made once the School Bus is completed.  

Here is a link to the PDF file  School Bus Pattern Pieces print this out and cut out the pieces as stated in the pattern.  On Monday's stream, Sept. 16, I will begin the process of building the bus.  I do not have one pre-made so this will be a see it once it is made.  Here is a clipart that inspired me in the design.

Pam's Clipart.com

You are more then welcome to download this PDF and create this bus.  The only thing i ask is that you not claim as your design.  I created the pattern file using Inkscape and saved it as a PDF for your use and crafting enjoyment.
Please respect this request.


Jean